Location:Home > Product > Epoxy resin Potting > Infomation  

Epoxy Casting Resin 9002GA-3/GB-3

Orgin:epoxy-cn.com | Write:Admin | View: | AddDate:2010-6-18
Purchase, please contact Mr. Wang: 13771380144

Epoxy Casting Resin 9002GA-3/GB-3----suitable for Fly Back Transformer (FBT)

 

Ⅰ. Component

    A: Epoxy Resin , Filler, Additive

    B: Acid Anhydride, Accelerator

 

Ⅱ. Characteristics

a)        Excellent workability

b)       Excellent penetrating

c)        The exothermic peak is relatively low, high reliability of encapsulated products

d)       Flame resistance (UL-94, V-0)

e)        Excellent electronic properties

f)        Environmental-friendly

 

Ⅲ. USE

Casting for Flyback Transformer and other electronic parts

 

Ⅳ. Packing

A: 33kg

B: 22kg 、220kg

 

Ⅴ. Transportation

This product does not belong to dangerous article . It can be transported in the way as common chemical do .

 

Ⅵ. Storage

a)        Completely packed, preferably between 15℃ and 25℃

b)       Free from direct sunlight

c)        Free from humidity

d)       Free from fire

Ⅶ.Product property

Items

Standard data

Testing standard

Before cure

Appearance

A

White liquid

Visual estimation

B

Light yellow liquid

Viscosity

(40℃,mPa ·s)

A

(1.0~1.5)×104

GB-3/T2794

B

15~23

A+B

≤ 550

Specific gravity

(25℃,g/ml)

A

1.70~1.75

GB-3/T4472

B

1.18~1.21

A+B

1.58~1.63

Mixing ratio(WT%)

A:B=100:30

/

Pot life(40℃,h)

>3.5

/

Gel time(80℃,min)

100~120

/

After cure

Hardness(25℃,D)

>87

Shore-D

Glass transition(℃)

108-120

DSC

Flexural strength(25℃,N/MM2

>74

/

Impact strength(KJ/cm2

>2.5

GB-3/T1043

Coefficient of liner thermal expansion(℃-1)(below Tg)

<5.0×10-5

GB-3/1036-70

Thermal conductivity(25℃,W/Mk)

>0.48

GB-33399-82

Volume resistivity(25℃,Ω·cm)

>3.9×1015

GB-3/T1410

Surface resistivity(25℃,Ω)

>5.8×1014

Dielectric constant(25℃,10KHz)

3.8±0.1

GB-3/T1409

Dissipation factor(25℃,10KHz)

<0.008

Water absorption(23℃,24h, %)

<0.15

GB-3/T1304

Breakdown voltage(25℃,KV/mm)

>25

GB-3/T1048

Flammability (UL-94, 6mm )

V-0

GB-3/T4069

         

Ⅷ. Potting Condition

Predegassing

 

Temperature(℃)

Vacuum (τ)

Time (h)

A

65±5

<2

4~12

B

35±5

<2

4~12

Potting

Coil preheating

Temperature (℃)

105±5

Time (h)

>1.5

Mixing temperature(℃)

40~45

Prevacuum pressure

Vacuum (τ)

<2

Potting

Vacuum(τ)

<5

Post vacuum pressure

Vacuum (τ)

<5

Time (s)

>20

Curing

75℃/2.5h+75~110℃/0.5h+110℃/2.5h

 

Ⅸ. Cautions

1. Cautions in use

a)        Part A should be agitated before use to disperse sufficiently the settled filler.

b)       Part B may be crystallized when it is stored at low temperature, in this case, heat it to 40-50℃ until it is completely dissolved.

c)        Weigh both A and B respectively, into specified amounts and mix them uniformly.

 

2. Cautions in handling

a)        Work place should provide a ventilator for performing sufficient ventilation

b)       Protective garments, gloves, goggles are necessary to workers to avoid direct contact of the materials.

c)        In the event of the agent contacting the skin wash it off immediately with warm water and alkali-free soap. Medical treatment is needed if skin is seriously imitated.

d)       Avoid breathing vapors, which can cause respiratory damage.

 

3.Cautions in Storage

a)        Store it at the cool and dark place (preferably between 15℃ and 25℃)

b)       Seal the products to avoid mixing of water into the products.

c)        Keep to the first-in first-out

d)       Once the container is opened, the material should be used as fast as possible, to prevent properties from deterioration by foreign substance and moisture absorption

Viscosity Vs. Temperature of 9003GA-3
Viscosity Vs. Temperature of 9002GB-3 
 Viscosity Vs. Temperature of 9002GA-3/GB-3
Viscosity at 40℃ Vs. Time of 9002GA-3/GB-3 
Glass Transition Temperature VS. Mixing Ratio of 9002GA-3/GB-3(75℃/2.5+75-110℃/0.5h+110℃/2.5h)
Gel Time VS. Temperature of 9002GA-3/GB-3 mixture
Exothermic Peak of 9002GA-3GB-3( 65g,75℃/2.5h+75-110℃/0.5h+110℃/2.5h)
 Volume Resistivity Vs. Temperature of 9002GA-3/GB-3

download 

 

Material Safety Data

 

1.   Identity: 9002GA-3

l  Material characteristics

Components: BPA type epoxy resin、filler、environmental-friendly、flame retardant、additive

l  Physical chemical characteristics:

Appearance:            white liquid

Odor:                  non

Boiling point:            non

Specific gravity (H20-1):   1.74

Vapor pressure (mmHg and temperature):  non

Melting point:            not available

Flash point:              216℃

Solubility in water:        negligible

l  Hazard data

Health hazard :           not available

Fire and explosion hazard: non

Stability:                stable

Hazardous decomposition products: carbon monoxide、carbon dioxide、hydrochloric acid

l  Control and protective measures

Protective clothing:      needed

Protective gloves:       needed

Goggles:              needed

Work place:            provide a ventilator for performing sufficient ventilation

l  Treatment of overflowing material

Soak up with cotton waste or saw dust and deposit in plastic-lined bin.

l  Emergency treatment

   Skin contact : wipe the material from skin with absorbent paper , then wash with warm water and alkali-free soap.  Medical treatment is needed when skin is seriously imitated.

   Eye contact : deal with running water for 15 minutes, then seek medical treatment.

   Inhalation: transfer the sick to outside and keep the air fresh.

l  Fire treatment:

Extinguished media: carbon dioxide、foam.

l  Waste disposal methods

Regular procedures approved by local authorities.

 

2.   Identity: 9002GB-3

l  Material characteristics

Components: acid anhydride, accelerator

l  Physical chemical characteristics:

Appearance:            light yellow liquid

Odor:                  irritative

Boiling point:            non

Specific gravity (H20-1):   1.20

Vapor pressure (mmHg and temperature):  non

Melting point:            <-10℃

Flash point:              156℃

Solubility in water:        solubility

l  Hazard data

Health hazard :         

Fire and explosion hazard:  non

Stability :               stable

Hazardous decomposition products: carbon monoxide carbon dioxide hydrochloric acid

l  Control and protective measures

Protective clothing: needed

Protective gloves: needed

Goggles: needed

Work place : provide a ventilator

l  Treatment of overflowing material

Soak up with cotton waste or saw dust and deposit in plastic lined bin.

l  Emergency treatment

   Skin contact : wipe the material from skin with absorbent paper , then wash with warm water and alkali-free soap.  Medical treatment is needed when skin is seriously imitated

   Eye contact : deal with running water for 15 minutes, then seek medical treatment

   Inhalation: transfer the sick to outside and keep the air fresh

l  Fire treatment:

Extinguished media: carbon dioxide、foam

l  Waste disposal methods

Regular procedures approved by local authorities

Copyright © www.epoxy-cn.com All Rights Reserved
Powered By V 3.3
支持EIMS,请勿删除,谢谢●!